Virtual OpenFiler performance
Translation of the original in Catalan. Read it in: CatalàCastellano
I've spent the whole day testing OpenFiler as a virtual machine inside the HP server I'm setting up. Well, apart from the technical details I wanted to do a simple and interesting test that after seeing the result still leaves me stunned. I've done a speed test with hdparm to find out the transfer speed between the ubuntu acting as VMWare server and a 750Gb hard disk:
root@vm0:~# hdparm -t /dev/sdc1
/dev/sdc1:
Timing buffered disk reads: 314 MB in 3.02 seconds = 104.11 MB/sec
Then from the virtual machine with OpenFiler (based on Red Hat linux) I've done the same test:
[root@nas0 ~]# hdparm -t /dev/sdb1
/dev/sdb1:
Timing buffered disk reads: 66 MB in 3.05 seconds = 21.65 MB/sec
Even though the name of the device comes out different the device is the same, this happens because in the virtual machine the device isn't the third 'SATA' device, but the second one. The virtual machine has captured the physical device, so I find the speed difference exaggerated. It should also be mentioned that OpenFiler hasn't let me install in 64bits on VMWare and I've had to do it with 32bits, I don't know whether such a brutal difference may be due to that.
The resources I have assigned to OpenFiler are:

If anyone has the chance to do a similar test, or has done it, let me know. Anyway, I'd say that with 64bit virtual machines I can't capture the real device or that's what it seemed to me I read VMWare saying. A big flaw from my point of view.