RouterOS the Mikrotik operating system

Translation of the original in Catalan. Read it in: CatalàCastellano

mikrotik.png
Mikrotik

Yesterday I was able to play for a few hours (some 6h) with RouterOS the operating system used by Mikrotik devices. Until now I had not been able to play with it for long (for about 1h) but yesterday I really was able to go a bit deeper into this system. A priori it seems quite complex or a bit difficult to use, above all because of the syntax and because there is no manual explaining how to work with the CLI. Basically the trick is to use Winbox which is a semi-graphical utility that greatly simplifies the commands in the purest CLI style.

What I liked most about this operating system is its great dynamism but without falling into the complexity of having to maintain a PC operating system. It has to be said though that it is not exactly simple, that is, technical knowledge is needed to be able to use it, not so much because of the syntax but because you have to work at a low level. That is, it does not use those blessed configuration wizards that annoy me so much, instead you have to be clear about networking concepts in order to configure the device. In part it recalls Cisco's IOS, but I would say it is much simpler and oriented towards the applications it is designed for. What is more, despite not being free the licences are much cheaper than Cisco's. It should also be said that despite being designed for Mikrotik's embedded boards it can also run on PC and other architectures.

Obviously it is very oriented towards services provided from an AP, since Mikrotik devices are essentially WiFi devices. But they even support services such as RADIUS servers, VPN servers, RAS servers, proxies, etc. Not to mention the frequency scanning tools and other tools more focused on wireless networks. Obviously the hardware it supports is quite limited but you have to bear in mind that it is very oriented towards routing, firewalling, hotspot gateway, bridging, client access tasks, etc. so it is not so much about supporting a wide range of hardware as about being very powerful in the functions mentioned.

Regarding WiFi I should highlight the ability to publish more than one SSID simultaneously, as well as being able to act simultaneously as an AP, client or bridge. As well as supporting multiple encryption systems: WEP, WPA-PSK, WPA-RADIUS, WPA2, etc. When it comes to setting up a hotspot the capacity it has to simplify the steps to set it up is also brutal, as well as the authentication systems, the ways and places where it can keep or request the user databases, as well as being fully prepared to set up an AAA system and link it to a billing system, for example. What is more, on the internet I have seen several programs oriented towards billing as a WISP or for owners of hotspots, such as hotels and other similar places.

So I am very happy with this discovery, let's see if I can complete the tests of the scenario I was testing, which I have not yet been able to finish 100% but I can almost assure that they will work with what I have seen so far. So Jordi the mixed system of Mikrotiks hotspots with Linksys (with DD-WRT v23 SP2) has to work almost for sure, when I have it ready I will post the configuration here. If you want to broaden your knowledge about the features routerOS offers above all don't miss this summary (local).

1 comment

Comments from the old blog, as they were written. Comments are closed.

  1. Jordi

    l'espero amb candeletes xD