Linux: Mounting file as a partition

Read it in: CatalàCastellano

When we have a file with a 'dd' of a full disk and we want to mount a partition of that disk, we have to use an offset for jumping to the beginning of the partition that we want to mount. Using 'fdisk' command we can find the partitions of that disk copied inside a file.

fdisk -l FILE_WITH_DISK_INSIDE

Once partition table is shown there is a column called 'Start' using the corresponding number in this column for the partition that we want we can obtain the offset required for our mounting point. Reasoning behind that is multiply start sector per number of bytes per sector.

OFFSET = START * 512

mount -o ro,loop,offset=OFFSET FILE_WITH_DISK_INSIDE /mnt

I hope thanks to this technical note next time that I forget how to get the offset I find it fastly.

**UPDATE 2018/08/29: **

If you don't want to do that manually, there is a small tool called

**losetup **

which maps the partitions of a disk image on a file.

example, attaching partitions to loopback devices

losetup -P /dev/loop0 DISK_IMAGE

just mount the devices now, they are /dev/loop0pX where X is the number of the partition

dettach this assignament:

losetup -d /dev/loop0