Home heating using Panstamp (Arduino + TI C1101) and SSR

Read it in: CatalàCastellano

Part 2 of 4Home heating with panStamp
  1. Alpha version of the new heating system using panStamp (Arduino+TI CC1101)
  2. Home heating using Panstamp (Arduino + TI C1101) and SSR
  3. Firmware of my home heaters (Panstamp = Arduino + TI C1101)
  4. Python meetup Barcelona presentation: Heating system using Panstamp and Python

Last weekend I worked on setting up home heaters using

Panstamp

. Panstamp is an

Arduino

board with Texas Instruments radio. Next winter we're going to control our home heater using connected internet devices like the laptop, tablet o mobile phones. In this post I only want to share some pictures about the process to install the electronics inside the heaters changing the old electronic boards with new custom ones.

The parts:

  • AC/DC transformer, outputs 5V. It's really cheap, in this case free because I have more than 20 of them from old projects.

acdc5v_

  • A small custom PCB designed and made by Daniel Berenguer, the owner of Panstamp. Thanks again Daniel. I bought the PCBs and parts for around 10€ each one.

IMG_20130923_114830

  • TMP36 temperature sensor. It costs about 1,5€ each one.

IMG_20130923_114814

  • Solid state relay (SSR) bought in Alied Express web site for less than 5€.

ssr

The process:

I used a lot of tools, because DIY aren't my strong hability.

IMG_20130921_141640

Double-head tape and hot-blue gun are need...

IMG_20130921_133746

because I want to use a cork base under the PSU and PCB

IMG_20130921_133723

Parallelization of the last process

IMG_20130921_143116

Using a cutter I got the units

IMG_20130921_143434

SSR setup

IMG_20130921_164651

connecting SSR, PCB and PSU

IMG_20130921_170711

assembling everything on heater side panel

IMG_20130921_173937

finally, mounting side panel on the heater

IMG_20130921_133547

Next weeks, I'll come back with this subject to talk about the software part.

7 comments

Comments from the old blog, as they were written. Comments are closed.

  1. Phil

    Very nice! Looking forward to seeing your code for the panstamps.

    1. Oriol Rius

      Thank you. Currently I'm working in firmware code. When I finish the code will be released :)

  2. Ludovic Pénet

    That's almost exactly the project I am starting to study. I look forward for details of your project.

    1. Oriol Rius

      How can I help you? what do you want to know exactly?

      1. Ludovic Pénet

        Maybe I did not search well on your site, but I did not find your posts on the software part. I still have a lot to learn to catch up, but knowing that you succeeded assembling a complete solution would be a great motivation. :-)

        1. Oriol Rius

          Hi Ludovic, last winter we enjoyed the heating system and we're happy with the results. You are right the code is not online yet. Now I'm out of home for some days but next weekend I'm going to look for some time to write the pending post.

        2. Oriol Rius

          Now you have the code is available here: http://oriolrius.cat/blog/2014/05/19/firmware-of-my-home-heaters-panstamp-arduino-ti-c1101/