Asterisk, call routers and other similar things
Translation of the original in Catalan. Read it in: CatalàCastellano
Benja asked me whether I knew of any product that for a reasonable cost (we are talking about less than 300€) would allow him to route the voice calls of his home through a conventional RTB line or a GSM line. Logically the thing is quite simple, it is about sending all the calls through the RTB line except the ones that start with 6 and 7 with a 9-digit number. So for this purpose, browsing the internet, I found a product from the company
that essentially does that, specifically it is
available via the company's website for about 140€.
On the other hand, if what is needed is a slightly more elaborate dial-plan we can always go for solutions based on Asterisk, in fact a few months ago I even came across versions of Asterisk prepared to be installed on a Linksys WRT54GL, impressive. But if something more professional is needed in this sense there are always the solutions from
, for example, with models like the
from 295$. In fact, I do not know this product first hand but Byteman used it for an NGO in Africa, it looks like it has a very professional finish.
On the other hand, I have to admit that I, regarding the problem Benja was posing to me, the first thing I thought of was to make use of 20 units of PIII at 500MHz with 256Mb RAM and 40GB HD (industrial computers) that I have tucked away and on which I had thought of installing
.
Askozia PBX is a Linux distribution of about 30MB with an Asterisk built in and with more functions than we can imagine for the size of what we are talking about:
- An Embedded System
- less than a 15MB download, less than 30MB installed
- only 200Mhz and 64MB RAM needed to run
- low resource requirements means low energy requirements
- scales up to match the hardware it is running on
- Telephony Services
- conference rooms with optional access pins
- voicemail to e-mail
- call groups
- multilingual audio prompts
- Automated Configuration
- automatic network configuration with DHCP client support
- automatic detection and configuration of telephony ports
- auto-provisioning of SIP telephones
- automatic configuration of remote gateways
- Connectivity
- support for SIP, IAX, Skinny, Analog and ISDN accounts
- calls freely routable between different technologies
- integrate external phones (mobile telephones) into your local dialplan
- outgoing provider fail-over routing
- Installation, Administration and Configuration Management
- distributed as a firmware image, individual software component compatibility thoroughly tested
- entire system configuration is stored in a single XML file simplifying backups, restores and provisioning
- administration is carried out through our multilingual WebGUI, going beyond the configuration of Asterisk, it also configures the system's network, dyndns, ntp, and smtp settings
- manual file appends and overrides supported
The people at Askozia also have products integrated with hardware and with a finish that is also very professional, if you are interested in buying something ready-made give it a look because it looks good. You can go directly to the
and compare the prices.
As always happens, the lack of time to coordinate the action will surely end up meaning that I do not do the integration, which I doubt would be much more than 1 little week of work to leave everything properly professional. But if anyone wanted to join in, now you know.

