pfSense: with an Intel Quad PRO/1000 you need a version >1.0.1
Translation of the original in Catalan. Read it in: CatalàCastellano
Today I went through one of those admin jobs that are so silly and make you waste so much time. I had to install an Intel PRO/1000 GT QUAD PORT in a Compaq Proliant DL320 server to act as a firewall with a pfSense and the damn server had no CDROM. The problem with connecting an external CD to it is that it detected the tray as open and would not boot; once past that, since the BIOS is old and proprietary, it would not allow booting from an IDE CD but wanted you to use the controller it ships with, specially for that, otherwise it could not boot from CD to install the pfSense. In the end I took one of the hard disks out of the server — luckily they are IDE — I put it in a normal computer and installed the pfSense on it; when I moved it back the change of PC was perfect. Just one catch: it turns out that version 1.0.1 of pfSense does not automatically recognise the GT version of the 4-port intel card. So I had to download the beta version of pfSense 1.2, which loaded the FreeBSD em driver that recognises the 4-port card perfectly.

Truly an odyssey of a day to do something quite simple. I mention it so that you don't waste time like me trying to work wonders with version 1.0.1: go straight to 1.2, which despite being in beta works very well. For the moment I would say it is good enough to have it in production. The firewall has finally ended up with 6 network cards, 2 at 100Mbps and 4 at 1000Mpbs. Of the 4 gigabit ports there are 3 that will have to work at full performance; when I have done the stress tests I will comment on how it goes. In any case, I imagine the results will be excellent because FreeBSD really is very good at traffic management, and even more so with drivers as mature as em for controlling intel hardware.
By the way, another odyssey was finding the intel card. Because, although a long time ago I had bought one. In fact, the model I had come across was the MT and the one I installed today is the GT; in fact not even the manufacturer is clear about deciding what the real difference between them is. Just a note, in case I forget again some day, that I found the cards quite close to home at a supplier in Vilafranca del Penedès called ELPO. Basically they work in the world of UPSs but they are also wholesalers of computer equipment in general. The curious thing is that no other official intel networking distributor in the country had it, nor did they want to bring it for me.
8 comments
Comments from the old blog, as they were written. Comments are closed.
javivf
Com diu el blog del pfsense...
For new installations, we recommend 1.2b1 at this time, unless you are using wireless.
Ara em falta averiguar el com passar del 1.0.1 a la nova sense tindre que reinstalar-ho tot :/
—
[1]
jo diria que tenen updates de firmware que diuen ells per fer-ho, ves a downloads i busca-ho. Però la veritat és que jo també ho vaig porvar i no hi va haver manera de que pugés el número de versió.
—
[1]
ja he vist el que comentes de la versió 1.2Beta1 en aquest post del blog de pfSense: Choosing which version to install
javivf
[2]
Sembla que han apres de errors passats pq he provat de actualitzar i tot ha anat prou be :)
bellera
Hola!
En el fòrum de pfSense hi ha persones que ens preguntem si és possible muntar una VPN site-to-site amb dos pfSense usant certificats en lloc d'una clau compartida:
http://forum.pfsense.org/index.php/board,10.0.html...
Si trobes com fer-ho ...
Per cert, jo tinc la 1.2 BETA funcionant des del 24-abril i cap problema.
Gràcies!
Josep Pujadas
bellera
Hola!
* La 1.0.1 és FreeBSD 6.1
* La 1.2 BETA és FreeBSD 6.2 (més al dia doncs).
* Jo vaig passar de la 1.0.1 a la 1.2 BETA instal·lant de nou i carregant el l'arxiu de configuració prèviament guardat. En el meu cas ho va deixar tot bé, sense problemes. Clar que si heu fet algun pedaç fora de l'estàndard això ja és una altra cosa ...
A reveure,
Josep Pujadas
—
[5]
Ostres doncs no he provat res d'VPNs amb pfSense encara. Em sap greu, obviament IPSec suporta el que dius però el problema és si la interficie del pfSense té alguna opció on configurar-ho. Em sap greu, però de moment totes les VPNs que tinc funcionant són de Cisco i d'OpenVPN.
—
[6]
Ja tinc en producció una versió Beta en un client i va de PM. És genial...