Configuring OvisLink Evo-W54USB (rt2570) - WiFi USB dongle
Translation of the original in Catalan. Read it in: CatalàCastellano

I don't know if you have ever tried to buy a USB dongle with Wifi that works with Linux. Well it really is not an easy thing, almost without meaning to this week I have bought two, it is specifically a rather tiny dongle compatible with IEEE 802.11g, WPA support, etc. Well, there is a website where the driver for the wifi cards that have this chipset is being developed, both the USB and the PCI and PCMCIA ones. In our case the one that interests us is the USB, although the chipset itself is called rt2500 specifically the USB model uses the 2570 chipset. Besides maybe the best thing is its cost, at PVD price it has cost me 24€ (kinyo) but if you look at the French websites you will see that the France price at PVP is 18€. That's the nice thing about our country.
Once this is clear when you enter the project website:
you already know which drivers you have to download. Maybe you have heard that work is being done to unify all the wifi card drivers on some base modules that implement in the same way a series of device access interfaces. With this the aim is to make it simpler to develop wifi software that works on all the wireless network cards for wifi. Something that right now is complicated, because each developer has gone their own way. So, what I am trying to explain is that work is being done so that this driver also works on this common base. Despite that I have not managed to make it work, it compiled and loaded correctly but afterwards the card didn't quite work, it didn't detect any network, not even the only LED it has turned on.
So, I recommend you download the package "Latest BETA rt2570 driver: v1.1.0-b1" from the download section of the opensource driver website. This has worked perfectly for me with a 2.6.13.2 kernel but it has not worked for me with a 2.6.14.2 kernel, for this one I have had to download the package "rt2x00 nightly CVS tarball: rt2x00-CVS", specifically the nightly version of today (3 February 2006). This version has compiled for me without problems with a 2.6.14.2 kernel. The steps for the installation of the driver are quite simple:
# tar xvfz rt2570-1.1.0-b1.tar.gz
# cd rt2570-1.1.0-b1/Module
# make
# make install
This installs the following module
rt2570.ko
this one when doing the
install
is placed in
/lib/modules/2.6.14.2/extra/rt2570.ko
. Then as we always do a
depmod -a
and now we can load the module
modprobe rt2570
, once the module is loaded then the kernel returns us the following message (dmesg):
RT25usb Driver version 1.0.0
After this we can now use the usual tools to configure our wifi link with linux:
iwconfig
,
iwpriv
, etc. a little tip is that first you configure the IP of the device with
ifconfig
and then the wifi parameters, now the LED of the dongle should start blinking. If it doesn't blink it doesn't work, at least for me it has not worked any time, even though it is capable of detecting networks for me but nothing links with anything. On the other hand when it blinks then you already have a chance that it works :)
Good luck with the subject...