From RJ45 to BNC

Translation of the original in Catalan. Read it in: CatalàCastellano

Courtesy of byteman, here you have a great find. Above all for people who install CCTV cameras with coaxial cable. Surely more than once you've come across runs of 4 twisted pairs CAT5 cable and you've had to pull parallel wiring with coax thinking: surely in a while this analogue camera will be an IP camera or something similar that will run on ethernet cable and we'll have to remove the coax. Well this 'bridge' (so to speak) allows converting this run of CAT5 cable with its RJ45 at the end into a BNC in such a way that the camera and the DVR think it was coaxial cable what was in between. It also supports some brutal cable runs 400m of CAT5 if the camera is colour and 600m if the camera is BW.

The product pdf and below a small image of the connector:

RJ45-BNC.png
From RJ45 to BNC RJ45-BNC

A crazy idea comes to mind and who knows if it would work, but when you have firefighter ideas like me you have to say them. If we put a wifi bridge in the place of the CAT5 cable would the thing work? I imagine not, since what it must transform are proprietary electrical pulses not standard ethernet, but there's nothing to lose by trying... who knows.

By the way, the product is from some people called DINAVEX and it seems they have quite interesting little things, it's worth taking a look at the website.

1 comment

Comments from the old blog, as they were written. Comments are closed.

  1. Carita