online again
Translation of the original in Catalan. Read it in: CatalàCastellano
At last I have managed to recover the data from the 'dying' hard drive... after more than 24h of retries I managed to recover 107Gb of the 111Gb it had on the 'bastard' hard drive. As Byteman very well says, trust the SEAGATEs! :) as I commented I mounted a 250Gb Maxtor in its place and now I still have a ton of free gigs. What a pleasure to see space on this server. Besides, apparently the IDE controller on the server's motherboard also has some problem. So I've had to set up my workstation as a server for now, so now there's an Athlon 2200+ as the server. Which compared to the K7 at 1000MHz is 'insane'.
Rambles aside, I also take the opportunity to mention that next week we're off to Murcia for this year's Esilux. I'll explain a bit about what I'll be doing there. I also inform you that tomorrow we'll add two more users to the eBosc network. That it won't be long before it's three years since I was reborn and before I turn 28 since I was born...i...i...i... many more things that I'll comment on when I feel like it and if I remember ;)
UPDATE:
Trying to run an fsck.reiserfs on the disk, don't miss the advice it gives us:
Replaying journal..
Reiserfs journal '/dev/hdc1' in blocks [18..8211]: 0 transactions replayed
Checking internal tree../ 2 (of 9)/147 (of 167)/158 (of 169)
The problem has occurred looks like a hardware problem. If you have
bad blocks, we advise you to get a new hard drive, because once you
get one bad block that the disk drive internals cannot hide from
your sight,the chances of getting more are generally said to become
much higher (precise statistics are unknown to us), and this disk
drive is probably not expensive enough for you to you to risk your
time and data on it. If you don't want to follow that follow that
advice then if you have just a few bad blocks, try writing to the
bad blocks and see if the drive remaps the bad blocks (that means
it takes a block it has in reserve and allocates it for use for
of that block number). If it cannot remap the block, use badblock
option (-B) with reiserfs utils to handle this block correctly.
bread: Cannot read the block (709434): (Input/output error).
Aborted2 comments
Comments from the old blog, as they were written. Comments are closed.
Marcos
Ja patiem tots!!! Menos mal que al final ho has solventat.
—
Gràcies pel recolzament. Aquest és el problema d'anar sempre amb una sabata una espardenya nano ;) a veure si movilpoint em dona algo més que disgustos i puc començar a montar un equip com deu mana. Per cert, algún dia m'animo i us explico els avanços que no són pocs... a més us he d'explicar que ja sóc un empresari 'con todas las de la ley'....hi hi hi! amb accions i totes les mandangues vaires :) això si pobre com una rata, com sempre.