Personal #power#sysadmin 1 min

UPS/SAI control on multiplatform networks

Translation of the original in Catalan. Read it in: CatalàCastellano

Well today I have had to look at these subjects and in fact, I am still too green to write anything that isn't a reference. So just a reference to the URLs of a software called: NUT (Network UPS Tools). Apart from the computer that has the UPS connected via serial, there can be other computers that are fed through this UPS therefore, they are also interested in being able to monitor the state of the UPS and/or receive messages from the "server" that has the UPS connected. These messages are normally to inform it of what the load state of the UPS is, the electrical incidents (rises, drops, micro-cuts, etc) and obviously to be able to make the system react (shut down the system, hibernate it, make it work only in read mode, etc) in case of a prolonged power cut. So with the tools mentioned on the NUT website you will be able to do all this and more.

On the other hand I also wanted to take the opportunity to tell you how funny documents of GPL software can be. An example is the FAQ of NUT, where while looking for information about how to start the PC after the power comes back it gives us a few solutions and when the author of the document runs out of ideas he writes:

"- Teach a monkey to watch the machine and press the power button when the outage is over. This might work, but it creates high produce bills.

Nice,eh?! I cracked up laughing... imagine that you are reading the FAQ all concentrated and suddenly you find this solution. Maybe some will say that commercial documentation is more serious. But I think that it is more boring, isn't it?