IBM NetInfinity 3000 + HP COLORADO 8Gb

Translation of the original in Catalan. Read it in: CatalàCastellano

Today I have spent the day suffering a whole odyssey with an IBM NetInfinity 3000 from 1998, basically it is a server with a PIII 500MHz, 198Mb RAM, 8Gb HD UltraWide SCSI-2 plus an 8Gb IDE HP COLORADO backup tape drive.

Well, everything started at 10h in the morning when I tried to turn it on, a problem that might seem trivial on any computer, but in this case it took me 10 wall-clock minutes to discover that the ON/OFF switch was a little hole that the "spectacular" box -black coloured- of this NetInfinity has, obviously neither the finger nor the nail goes through the little hole and I had to do it with the car keys.

That has been the first thing right after getting up, you already start things with little enthusiasm, then I installed a Slackware 7.1 and updated some packages to be able to put a kernel 2.4.2, the glibc-2.2.1 and a sendmail 8.11.2. With that I have basically configured the internal mail thing that this computer has to provide.Afterwards I configured samba 2.0.7 and set up the file server.

Up to here everything trivial, the problem came when I had to configure the backup system, here is where I messed it up, even though the kernel detects the tape unit perfectly (/dev/hda and /dev/ht0) thanks to the command mt -f /dev/ht0 erase I erased the contents of the tape and with a tar cvfz /dev/ht0 / I made a backup of the disk, the problem came when I tried to recover the backup (e.g. tar xvfz /dev/ht0 /etc/passwd) then there was no way, it gave me the following error:

tar: Read error on /dev/ht0: Input/output error

tar: At beginning of tape, quitting now

tar: Error is not recoverable: exiting now

and dmesg told me the following:

ide-tape: Reached idetape_chrdev_open

ide-tape: Reached idetape_chrdev_open

ide-tape: ht0: I/O error, pc = 8, key = 5, asc = 2c, ascq = 0

After long and refined searches on google I have not managed to find the solution, that said, I have seen that I am not the only one this happens to, although the latest news on the subject I have seen in the 2.4.0-test10 version of the kernel. I will keep looking but for now the matter is stopped here.

2 comments

Comments from the old blog, as they were written. Comments are closed.

  1. pau

    pues eso, q publiquis la solució si pot ser, que a mi també em te
    intrigat...

  2. Oriol Rius

    Finalment tb farà de servidor d'staroffice per una vintena de clients en
    windows, a veure si així podem desfer-nos de les ferragoses i cares
    llicencies d'office q estan pagant ara. Demà al matí aniré
    a montar aquest servidor a veure si hi ha sort.