IBM e-server x330 + ServeRAID-4L

Translation of the original in Catalan. Read it in: CatalàCastellano

This title that sounds like Chinese doesn't mean anything more than: PIII Dual 800MHz - 2HDs HOT SWAP SCSI 17Gb - 512Mb RAM - ServeRAID-4L RAID controller 16Mb cache and processor at 100MHz. Apparently installing a win2k server here is child's play, but no!!! because it's taken me almost 2 days to find out how the hell this was installed.

After millions of tests to find out how the ServeRAID business worked, we discovered that the steps to follow were:

  1. Try to boot the computer with a pindows boot diskette, go to the 50Mb unit that all IBMs carry which is usually unit D and look for the win2k drivers for the SCSI RAID controller. Watch out, because the CD includes drivers for this purpose that at the moment of truth win2k won't pick up. Once the drivers are found on the HD unit copy them onto a blank diskette. In case this doesn't work with the HDs connected to the SCSI RAID controller, you'd have to remove the controller and connect the HDs to the SCSI controller on the motherboard.

  2. Now we can mount the ServeRAID controller and connect the HDs to it, afterwards we have to go into the BIOS and disable the SCSI controller on the motherboard. Otherwise later windows doesn't know on which controller we have the HDs and doesn't find them. 3) We insert the serveRAID installation CD which is a boot CD. In our case we had to mount a level 1 RAID, that is, so that one of the disks would be a mirror of the other, because in case either of the two died we could hot-swap the other disk and once it had been changed it would synchronise automatically.

  3. Now we can mount the ServeRAID controller and connect the HDs to it, afterwards we have to go into the BIOS and disable the SCSI controller on the motherboard. Otherwise later windows doesn't know on which controller we have the HDs and doesn't find them. 4) Once booted with this CD, you have to define that there be only one logical unit and two "array" units, this means that there will only be one "C" that will be supported by two physical disks. Once this is configured on the RAID there's no need to tell it anything more.

  4. The "super IBM" carries a CD that allows installing the operating system on the computer, this CD is mainly useful for when we have to do multiple installations of identical systems. Since, it allows us to make a diskette that will then automate the rest of the installations and we won't have to be watching windows as always happens. Whoever says windows, says any of the operating systems that the x330 series supports.

  5. With this CD, we can blithely skip it if our case isn't that of a server farm, something quite frequent until we win the lottery. Therefore, we can boot directly with the win2kserver cd and press F6 quickly when it tells us to right at boot, since that way we'll be able to specify which SCSI controller we have, in case this one isn't supported directly by windows. That is, the case of the ServeRAID we're dealing with. When windows tells us we'll be able to insert the diskette we made before with the drivers and windows will be able to detect our HDs.

  6. From this moment on the windows installation is completely normal. Except that once windows is installed it's a good idea to install the ServeRAID Manager which comes on the CDs to have a LOG of what happens on the disks.

2 comments

Comments from the old blog, as they were written. Comments are closed.

  1. Oriol Rius

    Ahir divendres dia 2 de febrer, vaig anar a montar el segon servidor IBM x330 d
    la meva vida, però no el vaig poder acabar de montar, pq el CDROM no
    funcionava, per no anar ni s'obria per poder-li posar el CD. Però, si el
    forçaves amb un clip per poder-li posar, tp pillava el CD
    després.

  2. Oriol Rius

    El famós IBM al que li va petar el CD al cap d'una setmana li varen
    canviar el CD el súper servei tècnic d'IBM "in situ". Avui l'hi
    he instal·lat el W2K i el RAID i ha anat tot de PM a la primera i sense
    cap de les històries que explico en aquest article. He posat el CD del
    RAID l'he configurat, he posat el CD d'instalacions i setup d'IBM (NOS) m'ha
    fet el disquet per fer múltiples instal·lacions m'ha demanat el
    CD de W2K i s'ha instal·lat perfecte a la primera. No he hagut ni
    d'omplir les múltiples opcions de les típiques
    instal·lacions de W2K, amb el disquet que fa el NOS s'ha fet tot
    automàtic. Genial! no ho havia fet mai. Ja puc dir que sé montar
    racks en sèrie.Almenys els d'IBM :)